Approach Tech NVR-2018 User Manual download pdf (Page 62)

9.1.3 View the NVR video from a remote PC

Once Network View is executed a Login prompt will

appear, you must enter the default User Name:

admin, password: 9999 into the respective field and

click on OK to log into the application.

Follow the instructions below to use the Network

Viewer to browse a NVR video from a remote

location. Upon entering the Network Viewer, the

connection box will appear as follows.

1. Click the

Find tag to connection of the all NVR device in the LAN.

2. Choose a channel number from the Channel drop-down list.

3. Type in the user name for the chosen NVR.

4. Type in the password of the device and click the

Modify tag to add the device to the Device List.

5. Please repeat steps 2 to 4

again for another desire.

6. Select the NVR to enter this device.

7. Click the

NOTE: Upon connection, the connection status box indicates the name and IP address of the

selected device. If there’s a failure to connect, a “Fail” message appears on the screen

right after the device IP address; otherwise an “OK” appears. To add more connections or

units to the NVR, please repeat the above instructions.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 86 87

No comments

Approach Tech NVR-2018 User Manual Page 62