Approach Tech NVR-2018 User Manual download pdf (Page 19)

4.2 Recording Operations

This section details the way to record video into hard-disk drives. Before commencing with the recording

function, please configure the recording setting properly according to your needs.

4.2.1 Manual Recording

When the NVR is in live display mode, take the following steps to start recording:

(1) In live display, press the

REC button to record video into a hard disk drive with the

corresponding programmed recording settings. The monitor should display a flashing

REC

message and the

REC button will light up indicating the NVR is in the recording status.

(2) Press the

STOP button to stop recording any time.

(3) To access just recorded video, please refer to section 4.4 for more details.

4.2.2 Timer Recording

Timer recording provides two periods of time each day in a weekly table which programs the NVR

to turn on and off at specified times. This way the NVR will start and stop recording according to

the programmed schedule. Please take the following steps to program the scheduled recording.

(1) Press the

Setup button to enter the MAIN MENU.

(2) Select the

CLOCK / TIMER / SEQ and press the Enter button to enter the CLOCK /

TIMER / SEQ

page.

(3) Select the TIMER－SET.

(4) Press the

Enter button to enter the REC SCHEDULE table.

(5)

● You can set up by using the “<” button and the “>” button to locate the specific

day/hour/minute and use the “

^” button and the “v” button to set the

day/hour/minute you wish.

● You can also set up by using the Shuttle Ring and the Jog Dial. is the equal of the “<”

button

, is the equal of the “>” button , is the equal of the “^” button

and

is the equal of the “v” button .

● The time is displayed in a 24-hour clock format.

(6) To activate the programmed recording schedule, set the

TIMER ENABLE to ON. As the

scheduled recording is on, the red indicator of the Timer Record

will be on as well. To

deactivate it, set to

OFF.

(7) After scheduling is completed, press the

Enter button and set OK to save the setting or

select

CANCEL to leave the page without saving the settings.

(8) Press the

STOP button during the scheduled recording to stop it at any time. If you wish to

continue the scheduled recording, press the

REC button to proceed.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 86 87

Comments to this Manuals

No comments

Approach Tech NVR-2018 User Manual Page 19

Comments to this Manuals