Approach Tech NVR-2018 User Manual download pdf (Page 44)

SEQUENCER:

To regulate dwell time of the sequencer, you can use the “

^” button and the “v” button to select

dwell time provided here, ranging from the "

00" to the "30".you can set individual channels in different

dwell time. After set individual channels, quad and multi screen in different modes and then push the

Enter button . At once the legends "OK" and "CANCEL" appear at the bottom of the page. Now

press the “

<” button and the “>” button to confirm either "OK" or "CANCEL" respectively. Press

OK" to ratify your choice(s). If not, press "CANCEL".

5.4 ALARM SETTING

This menu allows users to program the configuration of alarm recording only when an alarm input is

activated. The device will record as long as the alarm input is activated.

ALM OPERATION:

This option determines whether to activate/deactivate the alarm recording when it detects an alarm input.

ON: The device activates the alarm recording when it detects an alarm signal from LANCAM.

OFF: The device ignores the alarm signal when it detects an alarm signal from LANCAM.

ALM DURATION:

This option allows users to set alarms for a certain duration. You can select one of the six following

options:

0 SEC, 30SEC, 1 MIN, 5 MIN, 10 MIN, and NON-STOP.

Duration

Setting

Alarm

activated

Alarm

deactivated

Reset

larm recordin

Non-Stop

Alarm

activated

Alarm

deactivated

Duration

larm recordin

Duration

MAIN MENU

LAN CAMERA

RECORD / BANDWIDTH

CLOCK / TIMER / SEQ

ALARM

COMMUNICATION

DISK

SYSTEM

GOTO ALARM PAGE

ALARM SETTING

ALM OPERATION : OFF

ALM DURATION : 30 SEC

MAX REC RATE : UNLIMIT

PRE- ALARM : ON

MAIN PAGE

ALARM REC ENABLE

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 86 87

Comments to this Manuals

No comments

Approach Tech NVR-2018 User Manual Page 44

Comments to this Manuals